How Many Types of Wort Boiling methods Are There?

by Ben | Nov 19, 2026 | Brewery

Wort boiling methods fall into three categories based on boiling pressure: atmospheric boiling, low-pressure boiling, and high-temperature continuous boiling. Brewers further classify the first two by heater location. When the heater sits inside the kettle, the process is internal boiling; when the heater sits outside, it is external boiling. The third method uses a pipe-type continuous system.

1. Atmospheric Boiling

Atmospheric boiling uses an open system​ that operates at the same pressure as the surrounding environment. This traditional method cannot recover waste heat effectively, so it wastes secondary steam.

Internal Boiling

Internal boiling places a tubular heater inside the brew kettle. Steam flows through the tubes while wort circulates between them, so heat exchange occurs across the tube walls. The temperature difference between upper and lower wort layers drives natural circulation, which makes the wort churn and improves heat transfer. A cone-shaped cover​ above the heater prevents foam overflow.

  • Boiling temperature:​ 105–107°C (221–225°F)
  • Boiling time:​ approximately 90 minutes

External Boiling

External boiling moves the heater outside the brew kettle. One external heater can serve two to three boiling kettles​ at the same time. A pump circulates the wort at 8–10 cycles per hour. After heating, the wort re-enters the kettle either tangentially​ or through a central draft tube with a cone cover. The wort flow velocity reaches 2.5 m/s, which delivers better heat transfer than internal boiling.

  • Boiling temperature:​ 107–110°C (225–230°F)
  • Boiling time:​ approximately 70 minutes

2. Low-Pressure Boiling

Research shows that raising the boiling temperature by 4°C and halving the boiling time​ achieves the same protein coagulation while producing lighter wort and preserving more amino acids and vitamins. Therefore, low-pressure boiling uses a closed system​ to recover and reuse secondary steam.

  • Boiling temperature:​ 107–110°C (225–230°F)
  • Boiling time:​ 60–70 minutes

3. High-Temperature Continuous Boiling

This method uses a double-pipe heater​ and runs at much higher temperatures — 130–140°C (266–284°F)​ — with a heating time of only about 3 minutes. Moreover, a complete heat recovery system​ cuts energy consumption to roughly 30%​ of traditional boiling methods.

Comparison at a Glance

MethodHeating positionSystem typeTemperatureTimeKey advantage
Atmospheric (internal)Inside kettleOpen105–107°C~90 minSimple operation
Atmospheric (external)Outside kettleOpen107–110°C~70 minBetter heat transfer, faster circulation
Low-pressureInside or outsideClosed, steam recovery107–110°C60–70 minRecovers secondary steam, lighter wort
High-temp continuousPipe heaterClosed, continuous130–140°C~3 minLowest energy use, very short boiling

Brewers can choose from traditional open atmospheric boiling to energy-efficient low-pressure and high-temperature continuous systems. Internal and external heaters differ in layout and circulation, while closed and continuous systems offer major gains in energy recovery, protein coagulation efficiency, and wort quality control.

Want more brewing guides? Read our breakdown of wort boiling purpose and stages or explore brewhouse heating systems.

Request A Quotation